Sitemap
Add to Favorites
Print
Contact us Subscribe to our Newsletter
 
Nitrile Rubber
 

Nitrile Rubber

Compounds of these polymers are the backbone of the O-Ring. They have excellent resistance to petroleum-based products, hydraulic fluids, most silicone fluids, and fuels.

Excellent resistance to tear and abrasion exhibiting high tensile strength. Nitrile rubber is the general term for acrylonitrile butadiene terpolymer.The acrylonitrile content of nitrile sealing compounds varies considerably (18 to 50%) and influences the physical properties of the finished material. The higher the acrylonitrile content, the better the resistance to oil and fuel. At the same time, elasticity and resistance to compression set is adversely affected. A compromise is often drawn and a medium acrylonitrile content selected.

Nitrile has good mechanical properties when compared with other elastomers and high wear resistance. Nitrile is not resistant to weathering and ozone. Good for hydraulic actuator seals, hydraulic pump seals, water pump seals, carburetor seals, transmission seals.


Resists aliphatic hydrocarbons (propane, butane, petroleum oil, mineral oil and grease, diesel fuel, fuel oils), vegetable and mineral oils and greases; HFA, HFB and HFC fluids; dilute acids, alkali and salt solutions at low temperatures; water (special compounds up to 212°F (100°C)).

 

 

 

 

PSG Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate and
complete. However, it will remain the responsibility of the purchaser / user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site and the
terms under which they are given may be modified at any time without notice.
In any event or occurrence, our liability is strictly limited to the value
of the original invoice.
Any links on this site are for the convenience of the visitor only and we
are not responsible for their content.

http://www.plasticshimsandgaskets.co.uk
http://www.polyesterconverters.com
http://www.psggroup.info

 
 
 
Plastic Shims and Gaskets Ltd is a member of the Gasket Cutter's Association BSI Accreditation PSG Group have been accredited to the relevant British and International Quality Standards since 15th August 1996. We accept all the major credit Cards: Visa, Master Card, Switch, Solo, Visa Electron, Maestro, JCB, Cheques, etc...
Call us now on: +44 (0) 20 7740 9705 © 2005 Plastic Shims and Gaskets. All rights reserved.